If configuration doesn’t complete, the final step, observe the scope light. If it is blinking green then red, then back to breathing blue, this means your Market is unable to connect to the WiFi network. Retry the configuring via the app and confirm your WIFI network and password are correct. Please try the following:

Confirm your WIFI network is 2.4ghz or dual band 5ghz/2.4ghz. The Market does not work with 5ghz WIFI networks.

Confirm that your WIFI network name and password are correct. BOTH are case sensitive.

Move your market closer to your WIFI router.

Be sure your Market is powered on and in access mode. To power on, press the lower reset button on the back of the base. To Enter access mode, hold top button on back of your market down for 3-4 seconds until it flashes white, then release the button. Your Market should breathe blue indicating it is in access mode. Confirm your WIFI network is 2.4ghz or dual band 5ghz/2.4ghz. The Market does not work with 5ghz WIFI networks.

Try calibrating your Market. If your Market is in sleep mode, take it out of sleep mode by pressing the lower rest button on the back of the base. Go to the August & Wonder app on your device and go to the Status tab. Tap the Calibrate button. Your market should tilt all the way left, then all the way right before centering at 0. It will then tilt to reflect current index or cryptocurrrency selected.

Try calibrating your Market. If your Market is in sleep mode, take it out of sleep mode by pushing the lower button on the back of your Market. Go to the August & Wonder app on your device and go to the Status tab. Tap the Calibrate button. Your market should tilt all the way left, then all the way right before centering at 0. It will then tilt to reflect current index or cryptocurrrency selected.

There are two things you can do to maximize battery life:

The first is to enable Power Save mode. To enable power save mode, go to the August & Wonder app and tap to get to the Status Page. Tap the Power Saving button to toggle on/off. In Power Save mode, the Market will go into deep sleep mode between updates and whenever the markets are closed. In deep sleep mode the scope light will be turned off and the Market will not respond to the app. The Market will wake up at the Update Interval set in the app to update the latest market data and tilt accordingly before going back to sleep.

The second thing you can do to extend battery life is to increase the update interval. The longer the interval the longer the battery will last between charges.

Just push the reset button on the back of the base. The reset button is the lower button.

The Market tracks the 11 market indices by tracking an ETF associated with that index (symbol shown in the parenthesis of the Index list). The app shows % change and value of the ETF. The value of the ETF will not match the value of the Index, but the % change will track very closely, though not exactly. This is commonly known as tracking error, but should be within tenths of a percent.Here are the ETFs used by The Market to track available indices.

S&P 500 (SPY) SPDR S&P 500 ETF Trust

Dow (DIA) SPDR Dow Jones Industrial Average ETF

NASDAQ (QQQ) PowerShares QQQ Trust

Russell 2000 (IWM) iShares Russell 2000

Nikkei 400 (JPXN) iShares JPX-Nikkei 400 ETF

MSCI (UKEWU) iShares MSCI United Kingdom

Euro STOXX 50 (FEZ) SPDR DJ Euro STOXX 50 Etf

Dax (DAX) Horizons DAX Germany ETF

Shanghai (ASHR) Xtrackers Harvest CSI 300 China A-Shares

Hang Sen (EWH) iShares MSCI Hong Kong Index Fund

Nifty 50 (INDY) iShares India 50 ETF